TomTom XL
From OpenTom
This is the second generation of the "TomTom One XL", which was renamed to "TomTom XL". Sometimes this model is referred to as "TomTom 330XL".
- Model: 4EG0.001.08
- Name: TomTom XL
[edit]
Hardware
- RAM: 32MB
- CPU: ARM926EJ
- LCD: TFT 4.3" (480 x 272 Pixels), Backlit, 65K colours
- GPS
- SD-Card Slot: No
- Internal Memory: 1 GB
- Buttons: Power Button
- Connection: USB
- Weight: 186 g
[edit]
Linux
[edit]
dmesg
Linux version 2.6.13-tt190943 (jore@nl-bld-10.intra.local) (gcc version 3.3.4) #1 Thu May 29 09:22:36 CEST 2008 CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ) Machine: TomTom GO Ignoring unrecognised tag 0x00000000 Memory policy: ECC disabled, Data cache writeback CPU S3C2412 (id 0x32412000) S3C2412: core 264.000 MHz, memory 132.000 MHz, peripheral 66.000 MHz S3C24xx Clocks, (c) 2004 Simtec Electronics Detected type 22, name TomTom XL On node 0 totalpages: 8192 DMA zone: 8192 pages, LIFO batch:3 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists Kernel command line: console=/dev/null quiet irq: clearing pending ext status 00000001 irq: clearing subpending status 00000406 irq: clearing subpending status 00000002 PID hash table entries: 256 (order: 8, 4096 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB = 32MB total Memory: 22272KB available (1949K code, 402K data, 88K init) Calibrating delay loop... 131.48 BogoMIPS (lpj=328704) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok unpacking initramfs... done Freeing initrd memory: 7168K NET: Registered protocol family 16 S3C Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C2412: IRQ Support S3C2412: Clock Support, UPLL 96.000 MHz SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized S3C DMA Driver, (c) 2003-2004 Simtec Electronics DMA channel 0 at c2800000, irq 33 DMA channel 1 at c2800040, irq 34 DMA channel 2 at c2800080, irq 35 DMA channel 3 at c28000c0, irq 36 ngffs: init_ngffs_fs: NGFFS initializing TomTom GO Backlight S3C, (C) 2007 TomTom BV TomTom GO Framebuffer Driver, (C) 2005 TomTom BV ttgfb: ttgfb_alloc: Using LFB from bootloader (reserved memory). S3C2410 RTC, (c) 2004 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics S3C2412 Watchdog Workaround, (c) 2006 TomTom SI4710: si4710_init: ------------------si4710_init:result = 0x00--------------- TomTom GO Hardware Detection Driver, (C) 2004,2005 TomTom BV TomTom GO ADC Driver, (C) 2004-2007 TomTom BV TomTom GO GPIO Driver, (C) 2004,2005 TomTom BV gpio_hw_init: UART 'ttySAC0' => 0 TomTom GO Accelerometer Driver, (C) 2004,2005 TomTom BV TomTom GO Battery Driver, (C) 2004,2005,2006,2007 TomTom BV TomTom GO GPS Driver, (C) 2004,2005 TomTom BV TomTom GO Touchscreen Driver, (C) 2004,2005 TomTom BV CoolSound engine, (C) 2004,2005 TomTom BV dma2: IRQ with no loaded buffer? CoolSound: sound_dma_init: Buffers allocated and associated. reallocating sound DMA buffer (previous:0 new:4096 allocating:65536) reallocating sound DMA buffer (previous:0 new:4096 allocating:65536) iis2410: iis_init: Current clock rate: 66000000 iis-24nn TomTom GO Buzzer Driver, (C) 2006 TomTom BV TomTom GO Gyro Driver, (C) 2007 TomTom BV TomTom GO Legacy USB mode detect, (C) 2007 TomTom BV (usbmode:) usbmode: Probing usbmode: Initialized TomTom GO Buspower monitor, (C) 2007 TomTom BV (buspower:) buspower: buspower_probe Done Valencia/Murcia dock driver - v1.0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 io scheduler noop registered io scheduler deadline registered RAMDISK driver initialized: 16 RAM disks of 7168K size 1024 blocksize PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx TomTom GO IDE Driver, (C) 2004,2005 TomTom BV physmap flash device: 80000 at 0 Found: EON EN29LV400BB number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for CP2101 usbcore: registered new driver CP2101 drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.04 Bluetooth: HCI USB driver ver 2.8 usbcore: registered new driver hci_usb Bluetooth: HCI UART driver ver 2.1 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Trying to set irq type for IRQ-1 s3c-sdi: probe: mapped sdi_base=f1200000 irq=83 irq_cd=4294967295 dma=0. s3c-sdi: initialization done. NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered TCP bic registered NET: Registered protocol family 1 Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.4 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 usbmode: usbmode_late_init usbmode:usbmodechange: initial_to_idle Freeing init memory: 88K Warning: unable to open /dev/console as initial console, res=-19. mmcblk0: mmc0:0001 000000 1003520KiB mmcblk0: unknown partition table FAT: free clusters recounted: 184781 FAT: filesystem 32 bits selected clock c0219ea0 (pclk) quot 428, calc 9600 selected clock c0219ea0 (pclk) quot 34, calc 115183 selected clock c0219ea0 (pclk) quot 428, calc 9600 selected clock c0219ea0 (pclk) quot 70, calc 57591 selected clock c0219ea0 (pclk) quot 106, calc 38394 selected clock c0219ea0 (pclk) quot 213, calc 19197 selected clock c0219ea0 (pclk) quot 34, calc 115183 selected clock c0219ea0 (pclk) quot 70, calc 57591 selected clock c0219ea0 (pclk) quot 428, calc 9600 ts: ts_ioctl: Invalid ioctl command 1074030095 selected clock c0219ea0 (pclk) quot 428, calc 9600 selected clock c0219ea0 (pclk) quot 70, calc 57591 selected clock c0219ea0 (pclk) quot 106, calc 38394 selected clock c0219ea0 (pclk) quot 213, calc 19197 selected clock c0219ea0 (pclk) quot 34, calc 115183 selected clock c0219ea0 (pclk) quot 70, calc 57591 selected clock c0219ea0 (pclk) quot 428, calc 9600
